Operation Manual

19
USER CONTROLS
Video Mode
IMAGE-I
(VIDEO MODE)
Brightness
Adjusting the brightness of the image.
■ Press the key to darken the image.
■ Press the key to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the amount of
black and white in the image.
■ Press the key to decrease the contrast.
■ Press the key to increase the contrast.
Colour
The colour setting adjusts a video image from black and white to fully
saturated colour.
■ Press the key to decrease the amount of colour in an image.
■ Press the key to increase the amount of colour in an image.
Tint
The tint adjusts the colour balance of red and green.
■ Press the key to increase the amount of green in the image.
■ Press the key to increase the amount of red in the image.
Sharpness
Adjusting the sharpness of the image.
■ Press the key to decrease the sharpness.
■ Press the key to increase the sharpness.
White Segment
Use the white segment control to set the white peaking level of DMD chip.
“0” stands for minimal peaking, and “10” stands for maximum peaking. If
you prefer a stronger image, adjust toward the maximum setting. For a
smooth, more natural image, adjust toward the minimum setting.