User Guide

Understanding The LED.

Each battery bank contains two (2) LEDs - a CHARGE LED and an

ERROR LED. The CHARGE LED indicates the charging process

(Red when charging, Green when charged) and the ERROR LED

displays a Reverse Polarity or Error Condition. To understand the

LED Light conﬁguration better, see the chart below:

When Charging

RED

LED Explanation

When Charged

GREEN

Reverse Polarity

ORANGE

When the battery is charging, the CHARGE

LED will be illuminated RED. The CHARGE

LED will remain a solid RED color (not

blinking) until the battery is fully charged.

When the battery is fully charged, the

CHARGE LED will be illuminated GREEN.

The CHARGE LED will remain a solid

GREEN color (not blinking) until either the

battery charger is disconnected or the

battery becomes discharged.

If a Reverse Polarity condition exists, the

ORANGE ERROR LED will illuminate. This

ERROR condition will be displayed whether

the charger is plugged in or disconnected

from an AC power source. Reverse the

battery connections to ﬁx this ERROR.

If an ERROR condition exists, all LEDs

will ﬂash. There are several reasons an

ERROR condition could exist. For help

troubleshooting ERROR conditions, see the

section entitled TROUBLESHOOTING.

Error Condition

FLASHING