Installation Guide

INITIALIZATION
11
Connecting to WiFi
Before connecting the Nokē Screen keypad to the WiFi, you need your device’s SSID and
password. Usually, you can find this on the bottom of your device.
To connect to WiFi,
1. From the Nokē Smart Entry Web Portal, select Settings > WiFi, and then select the + icon in
the top-right corner. The Add WiFi Network form is displayed.
2. Add your device’s Network SSID and Network Passphrase into the form, and then select
Add WiFi Network.
3. Add the new Nokē Screen keypad to the site in your mobile app.
4. Connect the Nokē Screen keypad to your ethernet. After it boots up, you can get the WiFi
settings from the server.
5. Power down the Nokē Screen keypad and disconnect it from the ethernet.
6. Power the Nokē Screen keypad back up, and now it will attempt to connect to the WiFi using
the WiFi settings you saved in the Nokē Smart Entry Web Portal.