Installation Guide

BEFORE WE BEGIN
PARTS
Please make a note of all the parts which you have received.
Below is the list of all parts that you would have received from Nokē.
MOUNTING THE BACK PLATE
Use the provided mounting screws to mount the back plate onto the desired surface.
For mounting into surfaces like concrete or brick, you can use the provided plastic
anchors to have a secure grip.
A
B C
D
A: NOKĒ PAD
B: BACK PLATE
C: MOUNTING SCREWS
AND ANCHORS
D: TAMPER-PROOF SET:
SCREW AND ALLEN
WRENCH
A
B
C
The screws could be secured into any of the 4 holes
provided in the back plate (shown as A and C in the picture above),
except the larger hole in the center.
The center hole B is used to route wires out of the Nokē Pad.
02