Installation Guide

MOUNTING THE NOKĒ PAD

Once the back plate has been mounted to the desired surface,

mount the Nokē Pad onto the back plate such that the tabs in the Nokē Pad

align with the slots in the back plate as shown below in the picture on the left.

TAB / SLOT

ALLEN WRENCH

Once the tabs have been aligned with the slots, the

Nokē Pad should be able to slide right around the

back plate without much effort.

Now that the Nokē Pad is held in place by the back plate,

use the provided Tamper-Proof Set Screw to secure the

Nokē Pad in place.

The allen wrench required is also provided.

See the picture to the right for reference.