Installation Manual

30 Nokia RoofTop™ Wireless Routing Installation Guide
3.3 Rear Panel
1. Antenna Connector: Connect a small vertical antenna directly to the
antenna jack or connect a cable to an external antenna. The connector
is a reverse-polarized TNC female unit. You may need a jumper
converter to attach cables to the wireless router. Most cables are
supplied with reverse-polarized TNC male connectors. For systems
with an amplifier, connect a small jumper cable to the DC Injector
“To Radio” connector.
2. LAN: The LAN interface is a standard 10/100 BaseT Ethernet RJ45
jack. Connect the LAN interface on the wireless router to either:
• The network using a standard Ethernet cable, or
• A PC via an Ethernet crossover cable.
See Appendix A for a wiring description for the Ethernet crossover
cable.
3. Power Port: Connects the wireless router to the 12 VDC power
connector.
4. Strain Relief: For the 12 VDC power cable.
Rear Panel Connections
Wireless Router