Installation Guide
Table Of Contents
- SAR-Hm and SAR-Hmc Chassis Installation Guide
- Table of Contents
- List of Tables
- List of Figures
- 1 Preface
- 2 Mandatory Regulations
- 2.1 In This Chapter
- 2.2 List of Terms
- 2.3 Safety Warnings / Avertissements de Sécurité
- 2.4 General Requirements
- 2.5 Safety Approvals
- 2.6 Safety Approval for External DC Sources That Power This Equipment
- 2.7 Canada Regulations
- 2.8 United States Regulations
- 2.9 European Union Regulations
- 2.10 United Kingdom Regulations
- 2.11 Australia/New Zealand Regulations
- 2.12 China Regulations
- 2.13 South Korea Regulations
- 2.14 Japan Regulations
- 2.15 Hazardous Locations
- 3 7705 SAR-Hm and 7705 SAR-Hmc Overview
- 3.1 In This Chapter
- 3.2 Overview of the 7705 SAR-Hm and 7705 SAR-Hmc
- 3.2.1 7705 SAR-Hm and 7705 SAR-Hmc Components
- 3.2.1.1 Chassis Features
- 3.2.1.2 Ethernet Ports
- 3.2.1.3 RSVD Port
- 3.2.1.4 RS-232 Ports
- 3.2.1.5 Console Port
- 3.2.1.6 Alarms Port
- 3.2.1.7 Main and Diversity Antenna Connectors
- 3.2.1.8 GPS Antenna Connector
- 3.2.1.9 WLAN Connector
- 3.2.1.10 Chassis Grounding
- 3.2.1.11 Power Supply Input
- 3.2.1.12 High Voltage Power Supply Unit
- 3.2.1.13 Chassis Temperature Control
- 3.2.1.14 Chassis Mounting Options
- 3.2.1 7705 SAR-Hm and 7705 SAR-Hmc Components
- 3.3 Cellular Components
- 3.4 GNSS Components
- 3.5 WLAN Components
- 3.6 Citizens Broadband Radio Service
- 3.7 ADP-Hm Prerequisites and Pre-staging Considerations
- 3.8 Chassis Installation Process
- Customer Document and Product Support
Mandatory Regulations
30
SAR-Hm and SAR-Hmc Chassis Installation Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3HE 17810 AAAA TQZZA
2.4 General Requirements
The sections that follow outline the mandatory regulations that govern the installation
and operation of the 7705 SAR-Hm and 7705 SAR-Hmc. The information in this
section also describes instructions and information related to overall conformance
with the mandatory regulations. You must adhere to these instructions so that your
system meets regulatory requirements.
2.4.1 Anti-static Measures
Figure 1 shows the ESD awareness label used on Nokia products to alert personnel
to the presence of ESD-sensitive devices in the product. The necessary ESD
precautions must be taken whenever this symbol is present on the product.
Figure 1 ESD Awareness Label
This guide uses the following icon and associated text to provide special information
relating to ESD-sensitive activities or situations.
Danger: Before working on equipment that is connected to power, remove jewelry, such as
rings, necklaces, and watches. When metal objects are in contact with power and ground,
serious burns can occur or the objects can become welded to the terminals.
Warning: The compliance and long-term reliability of the 7705 SAR-Hm and
7705 SAR-Hmc are wholly dependent on using the product within the environmental limits
and restrictions described in the Site Preparation chapter.
17658