Installation Guide

SAR-Hm and SAR-Hmc Chassis Installation Guide 7705 SAR-Hm and 7705 SAR-Hmc Overview
3HE 17810 AAAA TQZZA © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
63
The 7705 SAR-Hm and 7705 SAR-Hmc TiMOS software is factory-installed.
Configuration files and executable software are stored locally in the on-board flash
memory. The system boots up when power is applied to the chassis.
The NSP Network Functions Manager - Packet (NSP NFM-P) can be used to
discover, configure, and manage the 7705 SAR-Hm nodes and domains. When the
7705 SAR-Hm or 7705 SAR-Hmc is powered on for the first time, Auto-Discovery
Protocol (ADP-Hm) is instantiated by a factory-installed default boot option that
automates and simplifies the initial commissioning of 7705 SAR-Hm or
7705 SAR-Hmc. See ADP-Hm Prerequisites and Pre-staging Considerations for
more information.
3.2.1 7705 SAR-Hm and 7705 SAR-Hmc Components
3.2.1.1 Chassis Features
Figure 8 and Figure 9 show the physical features on the front and back of the
7705 SAR-Hm and 7705 SAR-Hmc chassis. The back views shows the chassis with
the rear cover removed.
Figure 8 7705 SAR-Hm Chassis Front and Back Features
RSVD
SIM 1 SIM 2
STATUS
WIFI
SIM 1
ALARMS
GNSS
SIM 2
7705 SAR-Hm
Stat
Lnk
Lnk
Lnk
Lnk
Act
Act
Act
1
1
3
5
FE
RS232
Stat
Lnk
Lnk
Lnk
Lnk
Act
Act
Act
2
2
4
6
WLAN
GNSS
Main
Diversity
ConsoleAlarms
Power Input
System LEDs
External Alarms Port
RS-232 Ports
Ethernet Ports
WLAN
Connector
Front Features Back Features
Main Carrier
Connector
GNSS
Connector
Diversity
Connector
Ground
DIN Mounting
Bracket
Reserved for
Future Use
Dual SIM
Card Slots
26451
Console Port
RSSI
12/24V
+
-