Installation Guide
Table Of Contents
- SAR-Hm and SAR-Hmc Chassis Installation Guide
- Table of Contents
- List of Tables
- List of Figures
- 1 Preface
- 2 Mandatory Regulations
- 2.1 In This Chapter
- 2.2 List of Terms
- 2.3 Safety Warnings / Avertissements de Sécurité
- 2.4 General Requirements
- 2.5 Safety Approvals
- 2.6 Safety Approval for External DC Sources That Power This Equipment
- 2.7 Canada Regulations
- 2.8 United States Regulations
- 2.9 European Union Regulations
- 2.10 United Kingdom Regulations
- 2.11 Australia/New Zealand Regulations
- 2.12 China Regulations
- 2.13 South Korea Regulations
- 2.14 Japan Regulations
- 2.15 Hazardous Locations
- 3 7705 SAR-Hm and 7705 SAR-Hmc Overview
- 3.1 In This Chapter
- 3.2 Overview of the 7705 SAR-Hm and 7705 SAR-Hmc
- 3.2.1 7705 SAR-Hm and 7705 SAR-Hmc Components
- 3.2.1.1 Chassis Features
- 3.2.1.2 Ethernet Ports
- 3.2.1.3 RSVD Port
- 3.2.1.4 RS-232 Ports
- 3.2.1.5 Console Port
- 3.2.1.6 Alarms Port
- 3.2.1.7 Main and Diversity Antenna Connectors
- 3.2.1.8 GPS Antenna Connector
- 3.2.1.9 WLAN Connector
- 3.2.1.10 Chassis Grounding
- 3.2.1.11 Power Supply Input
- 3.2.1.12 High Voltage Power Supply Unit
- 3.2.1.13 Chassis Temperature Control
- 3.2.1.14 Chassis Mounting Options
- 3.2.1 7705 SAR-Hm and 7705 SAR-Hmc Components
- 3.3 Cellular Components
- 3.4 GNSS Components
- 3.5 WLAN Components
- 3.6 Citizens Broadband Radio Service
- 3.7 ADP-Hm Prerequisites and Pre-staging Considerations
- 3.8 Chassis Installation Process
- Customer Document and Product Support
7705 SAR-Hm and 7705 SAR-Hmc Overview
78
SAR-Hm and SAR-Hmc Chassis Installation Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3HE 17810 AAAA TQZZA
3.7 ADP-Hm Prerequisites and Pre-staging
Considerations
In order for ADP-Hm to function, a number of prerequisites must be completed in
advance of initial power-up of a 7705 SAR-Hm and 7705 SAR-Hmc. Refer to the
7705 SAR-Hm Main Configuration Guide for a list of prerequisites for ADP-Hm.
Consideration must be given to when and where initial power-up of the node occurs.
ADP-Hm supports two installation options that can be configured on the
NSP NFM-P before the initial boot-up of the 7705 SAR-Hm or 7705 SAR-Hmc. The
options are:
a. The 7705 SAR-Hm or 7705 SAR-Hmc can be booted for the first time at a
pre-staging facility, where it is initialized, secured, partially configured, and then
shut down. The router is then shipped to the installation site, installed, and
booted again, at which time the configuration process is completed.
b. The 7705 SAR-Hm or 7705 SAR-Hmc can be installed on site, where it is booted
for the first time, initialized, and configured.