Product Guide
Table Of Contents
- G-2426G-A Product Guide
- Legal notice
- Contents
- About this document
- 1 ETSI ONT safety guidelines
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI ONT safety guidelines
- 4 G-2426G-A unit data sheet
- 4.1 Overview
- 4.2 G-2426G-A part numbers and identification
- 4.3 G-2426G-A general description
- 4.4 G-2426G-A software and installation feature support
- 4.5 G-2426G-A interfaces and interface capacity
- 4.6 G-2426G-A LEDs
- 4.7 G-2426G-A detailed specifications
- 4.8 G-2426G-A GEM ports and T-CONTs
- 4.9 G-2426G-A performance monitoring statistics
- 4.10 G-2426G-A functional blocks
- 4.11 G-2426G-A standards compliance
- 4.12 G-2426G-A special considerations
- 5 Install a G-2426G-A indoor ONT
- 6 Replace a G-2426G-A indoor ONT
- 7 Configure a G-2426G-A indoor ONT
- 7.1 Overview
- GUI configuration
- Viewing device information and connection status
- Network configuration
- 7.14 Overview
- 7.15 Configuring LAN
- 7.16 Configuring LAN IPv6
- 7.17 Configuring WAN
- 7.18 Configuring WAN DHCP
- 7.19 Configuring Wireless 2.4GHz
- 7.20 Configuring Wireless 5GHz
- 7.21 Configuring wireless scheduling
- 7.22 Configuring IP routing
- 7.23 Configuring DNS
- 7.24 Configuring TR-069
- 7.25 Configuring GRE tunnel
- 7.26 Configuring Upstream (US) Classifier
- 7.27 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 7.44 Overview
- 7.45 Configuring the password
- 7.46 WAN speed test
- 7.47 Speed test history
- 7.48 Configuring LOID
- 7.49 Configuring SLID
- 7.50 Managing the device
- 7.51 Backing up the configuration
- 7.52 Restoring the configuration
- 7.53 Upgrading firmware
- 7.54 Rebooting the device
- 7.55 Resetting to factory defaults
- 7.56 Diagnosing WAN connections
- 7.57 Viewing log files
- RG Troubleshooting Counters
- 8 ONT configuration file over OMCI
Table 7-14 Wireless (5GHz) parameters
Field Description
Enable Select this checkbox to enable WiFi.
Bandwidth Select from:
• 20 MHz
• 40 MHz
• 80 MHz
Channel Select a channel from the list or select Auto to have the channel automatically assigned.
Transmitting Power Select a percentage for the transmitting power from the list:
• Low (25%)
• Medium (50%)
• High (75%)
• Maximum (100%)
WMM Select Enable or Disable from the list to enable or disable WiFi multimedia.
Total MAX Users Enter the total number of MAX users.
SSID Configuration
SSID Select
1
Select the SSID from the list.
SSID Name Change the name of the selected SSID.
Enable SSID Select Enable or Disable SSID from this list.
SSID Broadcast Select Enable or Disable SSID broadcast from this list.
Port Mode Select a port mode from the list. Route is the default.
Isolation Enable or disable isolation from this list.
MAX Users Enter the number of MAX users.
Encryption Mode Select an encryption mode from the list:
• WPA2-AES
• WPA2+WPA
• WPA/WPA2 Enterprise
• NONE-OPEN
WPA Key Enter the WPA key.
Enable WPS Select Enable or Disable from this list.
WPS Mode Select a WPS mode from the list: PBC (Push Button Connect) or PIN (Personal Identification Number)
Domain Grouping
Domain Grouping Select this checkbox to enable domain grouping. The fields Domain Name, Create One New Domain,
WAN Interface, Number of IPs and List LAN are available when the Domain Grouping field is enabled.
Domain Name Select a domain name from the list.
Create One New Domain Select this checkbox to create a new domain.
Configure a G-2426G-A indoor ONT
Network configuration
Configuring Wireless 5GHz
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
102 Issue 1