Product Guide
Table Of Contents
- G-2426G-A Product Guide
- Legal notice
- Contents
- About this document
- 1 ETSI ONT safety guidelines
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI ONT safety guidelines
- 4 G-2426G-A unit data sheet
- 4.1 Overview
- 4.2 G-2426G-A part numbers and identification
- 4.3 G-2426G-A general description
- 4.4 G-2426G-A software and installation feature support
- 4.5 G-2426G-A interfaces and interface capacity
- 4.6 G-2426G-A LEDs
- 4.7 G-2426G-A detailed specifications
- 4.8 G-2426G-A GEM ports and T-CONTs
- 4.9 G-2426G-A performance monitoring statistics
- 4.10 G-2426G-A functional blocks
- 4.11 G-2426G-A standards compliance
- 4.12 G-2426G-A special considerations
- 5 Install a G-2426G-A indoor ONT
- 6 Replace a G-2426G-A indoor ONT
- 7 Configure a G-2426G-A indoor ONT
- 7.1 Overview
- GUI configuration
- Viewing device information and connection status
- Network configuration
- 7.14 Overview
- 7.15 Configuring LAN
- 7.16 Configuring LAN IPv6
- 7.17 Configuring WAN
- 7.18 Configuring WAN DHCP
- 7.19 Configuring Wireless 2.4GHz
- 7.20 Configuring Wireless 5GHz
- 7.21 Configuring wireless scheduling
- 7.22 Configuring IP routing
- 7.23 Configuring DNS
- 7.24 Configuring TR-069
- 7.25 Configuring GRE tunnel
- 7.26 Configuring Upstream (US) Classifier
- 7.27 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 7.44 Overview
- 7.45 Configuring the password
- 7.46 WAN speed test
- 7.47 Speed test history
- 7.48 Configuring LOID
- 7.49 Configuring SLID
- 7.50 Managing the device
- 7.51 Backing up the configuration
- 7.52 Restoring the configuration
- 7.53 Upgrading firmware
- 7.54 Rebooting the device
- 7.55 Resetting to factory defaults
- 7.56 Diagnosing WAN connections
- 7.57 Viewing log files
- RG Troubleshooting Counters
- 8 ONT configuration file over OMCI
Table 7-36 USB parameters (continued)
Field Description
Username Enter the username for the FTP server.
Password Enter the password for the FTP server.
Re-enter Password Enter the password for the FTP server.
Enable SFTP server Select this checkbox to enable using an SFTP server.
Enable SFTP for Remote Access Select this checkbox to enable SFTP for remote access.
Username Enter the username for the SFTP server.
Password Enter the password for the SFTP server.
Re-enter Password Enter the password for the SFTP server.
Enable Printer Sharing Select this checkbox to enable printer sharing.
Printer sharing is disabled by default
Username Enter the username for the SFTP server.
Password Enter the password for the SFTP server.
Re-enter Password Enter the password for the SFTP server.
Connected USB Devices Table For each printer that is connected to the ONT, the following fields are displayed:
• Host Number for example: Printer1, Printer2
• Device Name: name or identification for the USB device
• Format: displays the storage format (applies only to a USB storage device)
• Total space (applies only to a USB storage device)
• Free space (applies only to a USB storage device)
3
Click Save.
END OF STEPS
7.42 Configuring UPnP and DLNA
1
Click Application→UPnP and DLNA from the left pane in the GPON Home Gateway page.
The UPnP and DLNA page displays.
Configure a G-2426G-A indoor ONT
Configuring the Application
Configuring UPnP and DLNA
7368 ISAM ONT
Draft Draft
September 2020
Issue 1 145
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA