Product Guide
Table Of Contents
- G-2426G-A Product Guide
- Legal notice
- Contents
- About this document
- 1 ETSI ONT safety guidelines
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI ONT safety guidelines
- 4 G-2426G-A unit data sheet
- 4.1 Overview
- 4.2 G-2426G-A part numbers and identification
- 4.3 G-2426G-A general description
- 4.4 G-2426G-A software and installation feature support
- 4.5 G-2426G-A interfaces and interface capacity
- 4.6 G-2426G-A LEDs
- 4.7 G-2426G-A detailed specifications
- 4.8 G-2426G-A GEM ports and T-CONTs
- 4.9 G-2426G-A performance monitoring statistics
- 4.10 G-2426G-A functional blocks
- 4.11 G-2426G-A standards compliance
- 4.12 G-2426G-A special considerations
- 5 Install a G-2426G-A indoor ONT
- 6 Replace a G-2426G-A indoor ONT
- 7 Configure a G-2426G-A indoor ONT
- 7.1 Overview
- GUI configuration
- Viewing device information and connection status
- Network configuration
- 7.14 Overview
- 7.15 Configuring LAN
- 7.16 Configuring LAN IPv6
- 7.17 Configuring WAN
- 7.18 Configuring WAN DHCP
- 7.19 Configuring Wireless 2.4GHz
- 7.20 Configuring Wireless 5GHz
- 7.21 Configuring wireless scheduling
- 7.22 Configuring IP routing
- 7.23 Configuring DNS
- 7.24 Configuring TR-069
- 7.25 Configuring GRE tunnel
- 7.26 Configuring Upstream (US) Classifier
- 7.27 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 7.44 Overview
- 7.45 Configuring the password
- 7.46 WAN speed test
- 7.47 Speed test history
- 7.48 Configuring LOID
- 7.49 Configuring SLID
- 7.50 Managing the device
- 7.51 Backing up the configuration
- 7.52 Restoring the configuration
- 7.53 Upgrading firmware
- 7.54 Rebooting the device
- 7.55 Resetting to factory defaults
- 7.56 Diagnosing WAN connections
- 7.57 Viewing log files
- RG Troubleshooting Counters
- 8 ONT configuration file over OMCI
Maintenance
7.44 Overview
7.44.1 Purpose
This chapter describes the maintenance tasks supported by G-2426G-A ONTs.
7.44.2 Contents
7.44 Overview 149
7.45 Configuring the password 149
7.46 WAN speed test 151
7.47 Speed test history 152
7.48 Configuring LOID 154
7.49 Configuring SLID 155
7.50 Managing the device 156
7.51 Backing up the configuration 158
7.52 Restoring the configuration 159
7.53 Upgrading firmware 160
7.54 Rebooting the device 161
7.55 Resetting to factory defaults 162
7.56 Diagnosing WAN connections 163
7.57 Viewing log files 164
7.45 Configuring the password
A password must adhere to the password rules, which are as follows:
• the password may consist of uppercase letters, lowercase letters, digital numbers, and the
following special characters ! # + , - / @ _ : = ]
• the password length must be from 8 to 24 characters
• the first character must be a digital number or a letter
• the password must contain at least two types of characters: numbers, letters, or special
characters
• the same character must not appear more than 8 times in a row
When the password meets the password rules, the application displays the message “Your
password has been changed successfully”.
Configure a G-2426G-A indoor ONT
Maintenance
Overview
7368 ISAM ONT
Draft Draft
September 2020
Issue 1 149
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA