Product Guide
Table Of Contents
- G-2426G-A Product Guide
- Legal notice
- Contents
- About this document
- 1 ETSI ONT safety guidelines
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI ONT safety guidelines
- 4 G-2426G-A unit data sheet
- 4.1 Overview
- 4.2 G-2426G-A part numbers and identification
- 4.3 G-2426G-A general description
- 4.4 G-2426G-A software and installation feature support
- 4.5 G-2426G-A interfaces and interface capacity
- 4.6 G-2426G-A LEDs
- 4.7 G-2426G-A detailed specifications
- 4.8 G-2426G-A GEM ports and T-CONTs
- 4.9 G-2426G-A performance monitoring statistics
- 4.10 G-2426G-A functional blocks
- 4.11 G-2426G-A standards compliance
- 4.12 G-2426G-A special considerations
- 5 Install a G-2426G-A indoor ONT
- 6 Replace a G-2426G-A indoor ONT
- 7 Configure a G-2426G-A indoor ONT
- 7.1 Overview
- GUI configuration
- Viewing device information and connection status
- Network configuration
- 7.14 Overview
- 7.15 Configuring LAN
- 7.16 Configuring LAN IPv6
- 7.17 Configuring WAN
- 7.18 Configuring WAN DHCP
- 7.19 Configuring Wireless 2.4GHz
- 7.20 Configuring Wireless 5GHz
- 7.21 Configuring wireless scheduling
- 7.22 Configuring IP routing
- 7.23 Configuring DNS
- 7.24 Configuring TR-069
- 7.25 Configuring GRE tunnel
- 7.26 Configuring Upstream (US) Classifier
- 7.27 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 7.44 Overview
- 7.45 Configuring the password
- 7.46 WAN speed test
- 7.47 Speed test history
- 7.48 Configuring LOID
- 7.49 Configuring SLID
- 7.50 Managing the device
- 7.51 Backing up the configuration
- 7.52 Restoring the configuration
- 7.53 Upgrading firmware
- 7.54 Rebooting the device
- 7.55 Resetting to factory defaults
- 7.56 Diagnosing WAN connections
- 7.57 Viewing log files
- RG Troubleshooting Counters
- 8 ONT configuration file over OMCI
Table 8-1 Supported configuration files (continued)
File Index Description Details Supported ONTs/DPU
GFT G.fast-related
configuration file
This text-based json script file controls the default behavior
of the G.Fast ONT.
This file includes the provisioning parameters of the G.fast
transports layer; it does not include VLAN or QoS
provisioning.
While the ONT functions well with the default values; they
can optionally be customized.
While default values can work in VDSL mode, a download
file is required for the device to function as a G.fast ONT.
The Nokia defined index for the G.fast file is: "GFT"
Nokia G.fast.
8.3.1 Filename conventions
Nokia provides the raw configuration files, which must be saved by the operator in a TAR file to be
uploaded. TAR file names must be unique.
The filenames of the raw configuration files may not adhere to the naming conventions outlined
below. In this case, the files must be renamed to adhere to the naming conventions before the
operator generates the TAR file. Filenames are not case-sensitive.
ABCXXXXVER
where
ABC is the file index type (PRE, CFG, XML, GFT)
XXXX is the operator ID
For PRE and CFG, a valid operator ID is required
For XML and GFT, any characters may be used
VER is the file version (from 001 to 999)
Note: you cannot update the configuration using two files with the same name.
8.3.2 Download configuration file
The following table provides the supported download options for ONT pre-configuration file and
configuration file.
Table 8-2 Download configuration files
ONT type Legacy method download Zero management download
PRE file CFG file PRE file CFG file
Broadlight(eg.I240WA-
3FE54869AFGA80)
— ✓ — ✓
Broadcom(eg.G240WB-
3FE56773BFGA07)
— ✓ ✓ ✓
ONT configuration file over OMCI
Supported configuration file types
7368 ISAM ONT
Draft Draft
September 2020
Issue 1 173
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA