User Manual

6-54 Configuring, Installing, and Using Carrier Infrastructure
7 Attach the antenna brackets to the bolts on the left and right side of the antenna
(Figure 6.6)..You must attach these brackets to the antenna bolts before attaching the
brackets to the base station.
8 Attach the antenna brackets to the bottom left and right sides of the I-BTS. Insert the
bolts through the hole in the bracket which provides the desired level of down tilt.
• Top set of holes (the holes closest to the antenna bolt) provide a ___ level of tilt.
• Middle set of holes provide a ___ level of tilt.
Figure 6.7 Bracket on antenna bolt