User Manual

7-69
Installing the mounting bracket and attaching
cabinet to the 19-inch rack
Before inserting RMBs into the cabinet, attach the cabinet to the rack. To attach the cabinet
to the rack:
1 Attach a mounting bracket to the left side and right side of the cabinet using the 16
supplied screws (8 per side).
2 Attach the cabinet to the rack with the 8 supplied screws, 4 for each side.
Note: Do not operate the system before you have securely mounted the cabinet to a standard
19" rack that can handle the weight of the total system. To calculate the weight of your
system, note that the housing weighs 43 pounds, each base station weighs 18 pounds, and
each filter weighs 3.5 pounds.
So, if you have one cabinet, one RMB, and one filter, the weight of the total system is 64.5
pounds. Adjust this figure according to the number of RMBs and filters that you are using.
Figure 7.1 Cabinet mounting bracket
Step 2: Attach to rack.
Step 1: Attach to cabinet.