User Manual

11
Desktop CPEi 150 User Guide
Easy Setup
The CPE is easily set up in your home. Basic installation equipment
needed are the power adapter and cord, Ethernet cable, a PC or lap-
top computer and the CPE device.
Perform the following tasks before attaching the power cord or
powering up the unit:
• Place the CPE vertically on a flat surface.
• Connect one end of the Ethernet cable to the Ethernet port of
the CPE (1).
• Connect the other end of the same Ethernet cable to an
Ethernet port on your PC or laptop computer.
• Connect the power cord and the power adapter together.
• connect the power adapter to the power connector on the
bottom of the unit(2).
• Plug the power adapter into an AC power outlet. The CPE
will automatically turn on.