User's Manual
Table Of Contents
- Chapter 1: CPEo 450 User Guide
- Chapter 2: Installation
- Chapter 3: Configuration
- Chapter 4: Basic Configuration
- Personalize Menu
- Password Tab
- Device Time Tab
- Device Name Tab
- Restore Factory Settings Tab
- Internet Menu
- WiMAX Security Tab
- Internet Protocol Tab
- Firewall Tab
- Dynamic DNS Tab
- Status Menu
- Network Tab
- Telephony Tab
- Telephony Menu
- Account Tab
- Ring Tone Tab
- Caller ID Tab
- Call Forwarding Tab
- Voice Mail Tab
- Special Number Tab
- Chapter 5: Advanced Configuration
- Chapter 6: Configuring TCP/IP
- Chapter 7: Troubleshooting
- Chapter 8: Important Safety and Legal Information
- This Product complies with the following RF energy exposure standards and guidelines:
- RF Exposure Compliance and Control Guidelines and Operating Instructions
- FCC Regulatory Information
- Industry Canada Statement
- IC Radiation Exposure Statement:
- EU Declaration of Conformity
- Caring for the Environment
- Disposal of Motorola Equipment in EU Countries
- Disposal of Motorola Networks Equipment in Non-EU countries
- CMM Disclosure
- Copyrights and Trademarks
- Copyrights
- Usage and Disclosure Restrictions
Basic Configuration 4
Table 4-10 Caller ID Tab
Field or Button Description
Enable Line 1 Anonymous Incoming Call
Rejection
If Line 1 is your active telephone port,
check this box if you would like to
reject telephone calls from anonymous
incoming callers. The default is
checked.
Enable Line 1 Permanent Anonymous
Outgoing Call
If Line 1 is your active telephone port,
check this box if you would like to
permanently block your telephone
number from appearing on others’
Caller ID. The default is unchecked.
Enable Line 2 Anonymous Incoming Call
Rejection
If Line 2 is your active telephone port,
check this box if you would like to
reject telephone calls from anonymous
incoming callers. The default is
checked.
Enable Line 2 Permanent Anonymous
Outgoing Call
If Line 2 is your active telephone port,
check this box if you would like to
permanently block your telephone
number from appearing on others’
Caller ID. The default is unchecked.
Click the Apply button once you have made changes.
Call Forwarding Tab
The Call Forwarding tab allows you to manage the call forwarding features for your
telephone(s). The Call Forwarding tab contains the following:
Table 4-11 Call Forwarding Tab
Field or Button Description
Enable Line 1 Basic Forwarding Check this box to enable basic call
forwarding on Line 1. The default is
unchecked.
Line 1 Basic Forwarding to Number If “Enable Line 1 Basic Forwarding” is
checked, enter the telephone number
you would like to forward calls to.
Enable Line 1 Forwarding on No Answer Check this box to forward calls
received on Line 1 if there is no
answer. This function is not available if
“Enable Line 1 Basic Forwarding” is
checked.
(Continue)
68P09306A78-A 4-9
JAN 2010