User's Manual
Table Of Contents
- Chapter 1: CPEo 450 User Guide
- Chapter 2: Installation
- Chapter 3: Configuration
- Chapter 4: Basic Configuration
- Personalize Menu
- Password Tab
- Device Time Tab
- Device Name Tab
- Restore Factory Settings Tab
- Internet Menu
- WiMAX Security Tab
- Internet Protocol Tab
- Firewall Tab
- Dynamic DNS Tab
- Status Menu
- Network Tab
- Telephony Tab
- Telephony Menu
- Account Tab
- Ring Tone Tab
- Caller ID Tab
- Call Forwarding Tab
- Voice Mail Tab
- Special Number Tab
- Chapter 5: Advanced Configuration
- Chapter 6: Configuring TCP/IP
- Chapter 7: Troubleshooting
- Chapter 8: Important Safety and Legal Information
- This Product complies with the following RF energy exposure standards and guidelines:
- RF Exposure Compliance and Control Guidelines and Operating Instructions
- FCC Regulatory Information
- Industry Canada Statement
- IC Radiation Exposure Statement:
- EU Declaration of Conformity
- Caring for the Environment
- Disposal of Motorola Equipment in EU Countries
- Disposal of Motorola Networks Equipment in Non-EU countries
- CMM Disclosure
- Copyrights and Trademarks
- Copyrights
- Usage and Disclosure Restrictions
Advanced Configuration 5
Table 5-4 Lease Status Tab (continued)
Field or Button Description
Remaining Lease Duration Shows the amount of time, in seconds,
remaining in the lease.
Click the Apply button once you have made changes.
Lease Reservation Tab
This tab allows you to manage the lease reservation so that the same client receives
the same IP address each time. The Lease Reservation Tab contains the following
selections:
Table 5-5 Lease Reservation Tab
Field or Button Description
Select Select this box if you want to delete an established
lease reservation. Be sure to click the Delete
button once you have selected the exception to be
deleted.
Client Host Name Enter the client host name. The Name field is
limited to 20 characters (only 5 appear in display)
MAC Address Media Access Control (MAC) address. Enter the
MAC address of the device.
IP Address Enter the IP address that you want assigned to the
MAC Address.
Enabled Clicking this box enables the lease reservation.
Click the Apply button once you have made changes.
Control Panel
The Control Panel sections allow you to view/update your software information.
The Control menu provides the following tabs:
• Software
• Certificate
• System
• About
68P09306A78-A 5-5
JAN 2010