User Manual

Index-33
A
AAA server equipment, 1-6
Airlink
enabling, 2-12
Ancilliary equipment
housing requirements, 1-6
Antenna
coaxial cable, 3-21
connector, 3-21
gain recommended, 1-6
installation tips, 3-24
lightning protection, 3-21
planning installation, 1-6
type used to transmit MMDS
channels, B-31
AUX +48 VDC connector, 3-18
AUX ETHERNET connector, 3-18
B
Backbone network
connecting to, 3-26
Bandwidth
increasing on the downlink, 2-11
Base station
connecting to TVS module, 3-18
connectors, 3-15
daisy chaining within cell, 3-26
mounting, 3-22
naming, 2-8
power, 3-27
setting configuration parameters, 2-9
transmit power level, 2-11
C
Cable
alternative lengths, A-30
coaxial cable, 3-21
Ethernet/power, 3-16
GPS inter-base station cable, 3-20
GPS interface cable, 3-20
serial interface, 3-21
Cell
wiring, 3-14
Channels
in MMDS frequencies, B-31
shared with ITFS, B-31
Coaxial cable, 3-21
jumpers recommended, 3-24
maximum signal loss allowed, 3-24
Configuration parameters
setting before deploying base
station, 2-9
Connector
data, 3-15
Ethernet, 3-15
GPS, 3-19
ISP Ethernet in TVS module, 3-18
power, 3-15
serial interface, 3-21
TVS module, 3-18
Connectors
supported by base station, 3-15
D
Daisy chain cable See GPS Inter-base
station cable
Daisy-chaining base stations, 3-26
DHCP server equipment, 1-6
DNS equipment, 1-6
Documentation
finding additional, preface-xi
E
Equipment
provided by service providers, 1-6
Ethernet/power cable, 3-16
function of wires within, 3-17
splitting, 3-18
Expedience system
I NDEX