User Manual

11
Setting the OSU inside the mounting bracket
The OSU must be installed vertically. The OSU has a peg on top, and
a peg on bottom. The upper and lower pegs snap into the mounting
bracket’s peg holes.
After you search for the strongest signal from the service provider,
you insert a screw through the adjustment arch into the adjustment
screw opening on the OSU.
Tighten this screw fully only after you have performed the tasks in
step 8 “Finding the strongest service provider signal” on page 19.
Figure 5: Adjustment arch and peg hole in mounting bracket
Adjustment arch
Peg hole
Figure 6: OSU peg in mounting bracket
Insert adjustment
screw here
OSU peg inserted
in mounting