Manualshelf

User Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsNon-Line of Site Wireless Data Link
11121314151617181920
12
You must install the OSU vertically. To install the OSU in the
mounting bracket:
1 Make sure the bottom of the OSU faces the earth. This is the side
of the OSU labelled with a sticker “MOUNT THIS SIDE
DOWN”.
2 On the bottom arm of the mounting bracket, snap the OSU’s peg
into the peg hole.
To accommodate the height of the peg, you may need to bend
the mounting bracket’s edge down slightly.
3 On the top arm of the mounting bracket, snap the OSU’s upper
peg into the adjustment arch.
To accommodate the height of the peg, you may need to lift the
mounting bracket’s edge up slightly.
Figure 7: MOUNT THIS SIDE DOWN Sticker
MOUNT THIS
SIDE DOWN