User Manual

22
10 Remembering the strongest signal reported, re-orient the front of
the OSU in the direction that the OSU was pointed when the
strongest signal was found.
11 Tighten the screws fully that hold the OSU in place.
12 Return to the LinkMonitor program. Click Stop Scan.
8B
USING THE SOUND (AUDITORY) METHOD TO FIND
THE STRONGEST SIGNAL
To use the sound (auditory) method to find the strongest signal:
1 Install the LinkMonitor program as described in the section
“Installing the LinkMonitor program” on page 19.
2 On the LinkMonitor window, click Start Scan.
3 Return to the OSU outside. You should hear the OSU beeping.
4 The constancy/frequency of the beeps indicate the strength of
the signal that the OSU detects.
5 Rotate the OSU along the adjustment arch, noting constancy/
frequency of the beeps.
6 Point the OSU in the direction where the beeps are most
constant.
7 Tighten the screws.
9
CONNECTING TO THE INTERNET
To connect to the Internet:
Start your Internet browser, and try to open a few Internet sites.
• If you can open numerous sites, enjoy your new, high-speed ser-
vice.
• If yon cannot open any sites—for example if your browser dis-
plays a message “This page cannot be displayed” for all the sites
you tried to access—refresh the OSU’s connection, as described
in the section “Refreshing the OSU’s connection” on page 23.