User Manual

Connecting the OSU to a network

Note: Use only one OSU on a network. Do not use multiple OSUs

on the same network.

To directly connect the OSU to a computer, use the supplied

Ethernet cable (also known as a straight-through cable).

However, to connect the OSU to a hub or switch, use an Ethernet

cable appropriate for your network device. This might be a straight

through or cross-over cable, depending on how your network device

switches signals. When determining how to set up your network,

remember that the OSU device operates as a hub or a bridge.

After connecting the OSU to the network device, power the OSU and

scan for a service provider signal, as described in earlier sections of

this guide.