User Manual

10
3B
USING THE SOFTWARE-ASSISTED METHOD TO FIND THE STRONGEST
SIGNAL
Note: The software-assisted method is available only to users who use Windows (versions later
than 3.11) as their operating system.
To use the software program to help you search for the strongest service provider signal in your
area:
1 Install and start the LinkMonitor™ program.
2 Find the strongest service provider signal.
Each task is explained in greater detail in the sections that follow.
Installing and starting the LinkMonitor program
1 If your computer is not powered on, power it now.
2 Make sure the Ethernet cable and power cable are connected to the RSU.
3 Plug the other end of the Ethernet cable into your computer.
4 Locate the software CD supplied with your RSU.
5 Insert the CD into your computer’s CD drive. If the installation program does not start
automatically, start it by clicking on the Setup.exe icon.
Follow the instructions in the dialog boxes to complete the installation of the LinkMonitor
program.
6 After the software is installed, a blue RSU icon appears in your system tray (Figure 8).
To run the LinkMonitor program, right click on the icon, and select Open.
Figure 8: Starting the LinkMonitor program
LinkMonitor program’s icon in
system tray