User Manual
1
Welcome
This document describes how to install and use your Expedience residential subscriber unit
(RSU) to obtain wireless high-speed Internet access. You can connect your RSU to a computer
or to a small office/home office (SOHO) local area network (LAN) through a hub, switch, or
router.
BEFORE YOU BEGIN
• Make sure your computer is equipped with an Ethernet network interface card (NIC).
• The Ethernet cable that is supplied with your RSU plugs into any standard Ethernet NIC.
The NIC is not provided with the RSU, but you can purchase a NIC at most computer
and electronics stores.
• Find an appropriate location for your RSU.
• Make sure you are operating the RSU in a room near an outside window on the first or
second floor of your home or office.
• You need to locate the RSU close to a wall outlet. The RSU uses a standard power supply
and can sit on a desktop or shelf.
• Your RSU comes with a category-5 Ethernet cable. If you choose to place the RSU a
good distance from your computer, you may need to purchase a longer Ethernet cable.
If you purchase a cable, make sure the cable is a category-5 Ethernet cable with RJ-45
connectors on each end.
• Locate the components shipped with your RSU device:
•RSU device
•Software CD-ROM
• RSU Quick Start Guide
• Power cable and power supply box
• Ethernet cable