User Manual

9
Figure 8 illustrates how the screw, split lock, flat washer and double-tab washer are put
together.
1 For the top of the mounting bracket, assemble the bolt (coated with anti-seize compound),
split lock washer and flat washer as shown in Figure 8.
2 For the bottom of the mounting bracket, assemble the bolt (coated with anti-seize
compound), split lock washer, flat washer, ground wire, and double-tab washer, as shown
in Figure 8.
Let the ground wire dangle to the ground.
3 On the upper arm of the mounting bracket, insert the bolt through the adjustment arch on
the mounting bracket.
4 Partially tighten the bolt on the OSU to hold it in place.
Figure 8 Mounting bracket screw assembly
Bolt, coated with
Split lock washer
Flat washer
Bracket
Solid ground wire
Split lock washer
Flat washer
Double tab washer
Bolt, coated with
Top of unit
Bottom of unit
anti-seize compound
anti-seize compound