User Manual

3
Figure 2 illustrates the OSU package contents. Components are not to scale.
Connecting the OSU to a computer
This section describes how to connect the OSU to a computer.
If the OSU is to be connected to a network device (such as a router or switch), refer to the
section “Connecting the OSU to a network” on page 17, in this guide.
Installation overview
The installation consists of the following major tasks, each of which is explained in greater
detail in the sections that follow:
1 Attach the OSU to the outside of the building.
2 Run the OSU power/Ethernet cable through a hole drilled through the building’s wall.
3 Connect the OSU ground wire.
Figure 2 OSU package contents
Power supply
OSU
Mounting bracket
Utility software CD-ROM
Double tab washer (1)
Flat washer (6)
Split lock washer (2)
Power cord
Lag bolt (4)
Hex bolt (2)
Ethernet/power cable