User's Manual

EMC DATA
Declaration – electromagnetic emissions and immunity for equipment and systems that
are not life-supporting and are specified for use only in a shielded location
Non
-
Life Support Equipment Separation Distance Calculation (3Vrms / 3V/m compliance)
Rated maximum output
power of transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to
80 MHz in
ISM bands
d = [3,5] P
V1
80 MHz to 800 MHz
d = [3,5] P E1
800 MHz to 2.5 GHz
d = [ 7 ] P E1
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1
1.17
1.17
2.33
10
3.69
3.69
7.38
100
11.67
11.67
23.33
The
Withings Thermo
declaration electromagnetic immunity
The
Wi
things Thermo
system is intended for use in the electromagnetic environment specified below.
The customer or the user of the Withings Thermo system should assure that it is used in such an
environment.
Immunity test
IEC 60601 test
level
Compliance
level
Electromagnetic environment
–
guidance
Conducted
RFIEC 61000-4-6
3 Vrms
150 kHz to 80
MHz
N/A
N/A
Radiated RF IEC
61000-4-3
3 V/m
80 MHz to 2.5
GHz
N/A
Portable and mobile RF communications
equipment should be used no closer to any part
of the EQUIPMENT or SYSTEM including cables,
than the recommended separation distance
calculated from the equation applicable to the
frequency of the transmitter. Interference may
occur in the vicinity of equipment marked with
the following symbol.
Declaration
–
electromagnetic immunity
The Wi
things Thermo
is intended for use in the electromagnetic environment specified below.
The customer or the user of the Withings Thermo system should assure that it is used in such an
environment.
Immunity test
IEC 60601
test
level
Compliance level
Electromagnetic environment
–
guidance
Electrostatic
discharge
6 kV contact 8 kV
air
6 kV contact 8 kV
air
Floors should be wood, concrete or ceramic tile.
If floors are covered with synthetic material, the
relative humidity should be at least 30 %.