Withings Blood Pressure Monitor Version 2.0 AUG.
Withings Blood Pressure Monitor User’s Guide Withings is the trademark of this product and all other trademarks or Website mentioned in this document are the properties of their respective owners. Disclaimer Information in this guide may change without notice. The manufacturer assumes no responsibilities for errors that may appear in this guide.
Withings Blood Pressure Monitor User’s Guide In order to use your Withings Blood Pressure Monitor, you need an iPhone, iPad, iPod touch (iOS 5 and higher) or Android (v2.3.3 and higher) Package content Withings Blood Pressure Monitor Four AAA alkaline (LR3) cells (already inserted) Micro‐USB to USB adapter User manual Micro‐USB to USB adapter Important Safety Information Consult your doctor during pregnancy, arrhythmia and arteriosclerosis.
Withings Blood Pressure Monitor User’s Guide Intended use The device is a digital monitor intended for use in measuring blood pressure and pulse rate in adult patient population with arm circumference ranging from 9 inches to 17 inches (22cm‐ 42cm). This device is not intended to be a diagnostic device. Contact your physician if hypertensive values are indicated.
Withings Blood Pressure Monitor User’s Guide Table of contents About Blood Pressure ..................................................................................................................... 6 Installation .......................................................................................................................................... 7 Begin to measure, take and store a reading ............................................................................ 9 After Use .....................
Withings Blood Pressure Monitor User’s Guide About Blood Pressure What is blood pressure ? Blood pressure (BP) is the pressure exerted by circulating blood upon the walls of blood vessels, and is one of the principal vital signs. During each heartbeat, BP varies between a maximum (systolic) and a minimum (diastolic) pressure. The mean BP, due to pumping by the heart and resistance to flow in blood vessels, decreases as the circulating blood moves away from the heart through arteries.
Withings Blood Pressure Monitor User’s Guide Installation Alkaline cells are already insterted in your Withings Blood Pressure Monitor when you buy it. Replacing the « AAA » alkaline cells If the low battery symbol appears in the Withings application, replace all four AAA alkaline cells at the same time. 1. Remove the AAA alkaline cells cover at the lower end of the aluminum tube. 2.
Withings Blood Pressure Monitor User’s Guide How to Measure your blood pressure Wirelessly on iOS 1. Unlock your iOS device 2. Press the button on top of the blood pressure monitor to turn it on 3. After a few seconds, the Withings Health Mate application will open 4. Navigate through the quickstart instructions by touching « next » until you reach the measurement screen (fig. 1) Wirelessly on Android 1. Unlock your Android device 2. Press the button on top of the blood pressure monitor to turn it on 3.
Withings Blood Pressure Monitor User’s Guide Begin to measure, take and store a reading 1. On the measurement screen (fig. 1), touch the «start» button to launch the measurement. The blood pressure monitor is designed to take measurements and store the measurement values in the memory of the device (iPhone, iPad or iPod Touch). Fig. 1 Using the single mode • On the measurement screen (fig. 1) press the «Start» button. The cuff starts to inflate automatically.
Withings Blood Pressure Monitor User’s Guide Using the auto mode The auto mode will take three measurements separated by an interval of time in order to calculate a precise average of your blood pressure. • On the measurement screen (fig. 2), touch the preferences icon . Make certain the auto mode is enabled. Select the interval,between each measurement. • Press the « Start » button. The cuff starts to inflate automatically. As the cuff inflates (fig.
Withings Blood Pressure Monitor User’s Guide After Use Cleaning Do not use an alcoholic‐base or solvent agent to clean the device. Clean the device with a soft, dry cloth. The dirt on the cuff can be cleaned by a moisten cloth and soap . Do not flush the device and cuff with much water Do not dismantle the device or disconnect the cuff or try to repair by yourself. If any problem happens, refer to the distributor.
Withings Blood Pressure Monitor User’s Guide Error Messages Error message Measurement could not be performed. Please try again. If the problem occurs again, please contact customer service. Connection error. Quit the application and reconnect your blood pressure monitor. Causes Hardware auto‐check error. Please wait until the cuff is totally deflated before starting a new measurement. Stay still during measurement. ‐ Cuff is not deflated before measurement. ‐ Noise interference.
Withings Blood Pressure Monitor User’s Guide Troubleshooting Problem Though the batteries are installed, there is nothing happening when connected to iOS or Android device Remedy 1. Check that your iOS or Android device is unlocked 2. Check and correct the AAA alkaline cells polarities 3. Remove the AAA alkaline cells and wait for one minute. Then install the AAA alkaline cells back. 4. Replace the AAA alkaline cells The inflation action cannot be done or the air pressure cannot rise 1. 2.
Withings Blood Pressure Monitor User’s Guide FCC Statement Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Withings Blood Pressure Monitor User’s Guide RF Statement ‐Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the following. ‐Interference may occur in the vicinity of equipment marked with ‐Portable and mobile RF communication equipment (e.g. cell phones) can affect Medical Electrical Equipment.
Withings Blood Pressure Monitor User’s Guide Declaration – electromagnetic emissions and immunity for equipment and systems that are not life‐supporting and are specified for use only in a shielded location The Wireless Blood Pressure Monitor declaration‐ electromagnetic immunity Declaration – electromagnetic immunity The Wireless Blood Pressure Monitor system is intended for use in the electromagnetic environment specified below.
Withings Blood Pressure Monitor User’s Guide DISPOSAL Actuation of European directives 2002/95/EC, 2002/96/EC and 2003/108/EC, for reduction in use of dangerous substances in the electric and electronic device and for garbage disposal. The symbol applied on the device or its packaging means that at the end of its useful life the product must not be disposed of with domestic waste.
Withings Blood Pressure Monitor User’s Guide User manual v2.0‐ Aug., 2013 © 2013 Withings. All rights reserved. iPad, iPhone and iPod touch are trademarks of Apple inc.