Datasheet

A GPS indicator is shown on the display.
One bar is one satellite. When the device tries to find a
satellite, the bar is yellow. When the device receives
enough data from the satellite to establish a GPS
connection, the bar turns green. The more green bars,
the stronger the GPS connection.
When the GPS connection is active, your current
location is indicated on the map with
.
Move and zoom
To move on the map, scroll up,
down, left, or right. The map
is oriented towards north by
default. The compass rose
displays the orientation of the
map and rotates during
navigation when the
orientation changes.
When you browse the map on
the display, a new map is
automatically downloaded if
you scroll to an area which is not covered by maps
already downloaded. These maps are free of charge,
but downloading may involve the transmission of
large amounts of data through your service provider's
network. For more information on data transmission
charges, contact your service provider.
The maps are automatically saved on a compatible
memory card (if inserted and set as the default maps
storage).
To zoom in or out, press * or #. Use the scale bar to
estimate the distance between two points on the map.
Adjust the map view
To define the metric system used in the maps, select
Options > Tools > Settings > Map > System of
measurement > Metric or Imperial.
To define what kinds of points of interest are shown
on the map, select Options > Tools > Settings >
Map > Categories and the desired categories.
To select whether you want to view maps in 2-D mode,
3-D mode, as satellite image, or hybrid, select
Options > Map mode > Map, Map 3D, Satellite, or
Hybrid. Satellite images may not be available for all
geographic locations.
To define whether you want the map view to be a day
view or a night view, select Options > Tools >
Settings > Map > Colours > Day mode or Night
mode.
To adjust other internet, navigation, routing, and
general map settings, select Options > Tools >
Settings.
54
Maps