Datasheet

2. Insert a compatible

memory card in the

slot. Ensure that the

contact area on the

card is facing down

and towards the slot.

3. Push the card in. You

can hear a click when the

card locks into place.

4. Replace the back cover.

Keep the device facing

down when replacing the

cover. Ensure that the

cover is properly closed.

Remove the memory card

Important: Do not remove the memory card

during an operation when the card is being

accessed. Doing so may damage the memory card

and the device, and corrupt data stored on the card.

1. Before you remove the card, press the power

key, and select Remove memory card. All

applications are closed.

2. When Removing memory card will close all

open applications. Remove anyway? is

displayed, select Yes.

3. When Remove memory card and press 'OK' is

displayed, remove the back cover of the device.

4. Press the memory card to release it from the slot.

5. Pull out the memory card. If the device is

switched on, select OK.

6. Replace the back cover. Ensure that the cover is

properly closed.

Antenna locations

Your device may have internal and external

antennas. Avoid touching the antenna area

unnecessarily while the antenna is transmitting or

receiving. Contact with antennas affects the

communication quality and may cause a higher

power level during operation and may reduce the

battery life.

Get started