Datasheet

● Phone IP address (for IPv4 only) — Enter the IP
address of your device.
● DNS addresses — Enter the IP addresses of the
primary and secondary DNS servers, if required
by your service provider. To obtain these
addresses, contact your internet service
provider.
● Proxy server address — Enter the address of
the proxy server.
● Proxy port number — Enter the port number
of the proxy server.
WLAN internet access points
Select Menu > Settings and Connectivity >
Destinations > Access point, and follow the
instructions.
To edit a wireless LAN (WLAN) access point, open
one of the access point groups, and select an access
point marked with
. Follow the instructions from
your WLAN service provider. Select from the
following:
● WLAN network name — Select Enter
manually or Search for networks. If you select
an existing network, WLAN network mode and
WLAN security mode are determined by the
settings of its access point device.
● Network status — Define whether the network
name is displayed.
● WLAN network mode — Select Ad-hoc to
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same WLAN network
name.
● WLAN security mode — Select the encryption
WPA/WPA2 are not available for ad hoc
networks). If you select Open network, no
encryption is used. The WEP, 802.1x and WPA
functions can be used only if the network
supports them.
● Homepage — Enter the web address of the
starting page.
● Use access point — Set the device to create a
connection using this access point automatically
or after confirmation.
The available options may vary.
Active data connections
Select Menu > Settings and Connectivity >
Connection mgr..
In the active data connections view, you can see
open data connections:
data calls
packet data connections
79
Connectivity
used: WEP, 802.1x, or WPA/WPA2 (802.1x and