Datasheet

ManualsBrandsNokia Manualscomputers & electronics002L2B7

Administrative settings

Select Menu > Settings and Connectivity >

Admin. settings.

To set the online time for the data call connection,

select Data call. The data call settings affect all

access points that use a GSM data call.

Packet data settings

Select Menu > Settings and Connectivity >

Admin. settings > Packet data.

The packet data settings affect all access points

using a packet data connection.

Select from the following:

● Packet data connection — If you select When

available and you are in a network that supports

packet data, the device registers to the packet

data network. Starting an active packet data

connection (for example, to send and receive e-

mail) is quicker than if the device establishes a

packet data connection when needed. If there is

no packet data coverage, the device periodically

tries to establish a packet data connection. If you

select When needed, the device uses a packet

data connection only if you start an application

or action that needs it.

● Access point — The access point name is needed

to use your device as a packet data modem to a

compatible computer.

● High speed packet access — Enable or disable

the use of HSDPA (network service) in UMTS

networks.

SIP settings

Select Menu > Settings and Connectivity >

Admin. settings > SIP settings.

Session Initiation Protocol (SIP) settings are needed

for certain network services using SIP. You may

receive the settings in a special text message from

your service provider. You can view, delete, or

create these setting profiles in SIP settings.

Access point name control

Select Menu > Settings and Connectivity >

Admin. settings > APN control.

With the access point name control service, you can

restrict packet data connections and allow your

device to use only certain packet data access points.

This setting is only available if your SIM card

supports the access point control service.

To turn the control service on or off, or to change

the allowed access points, select Options and the

corresponding option. To change the options, you

Connectivity