Advanced Car Kit CK-7W User’s Guide Installation Guide
DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product HF-5 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at: http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2005 Nokia. All rights reserved.
Contents For your safety ..................................................................................................... 5 Introduction.......................................................................................................... 6 Your Nokia Advanced Car Kit CK-7W................................................................................................... 6 Bluetooth wireless technology .................................................................................................
3. Putting the Advanced Car Kit into service .................................................. 22 Connecting a mobile phone using Bluetooth wireless technology............................................ 22 Pairing using a Bluetooth passcode .................................................................................................... 23 Automatic pairing with a compatible mobile phone .....................................................................
For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user’s guide. Keep all miniature SIM cards and accessories out of the reach of small children. ROAD SAFETY COMES FIRST Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists.
Introduction ■ Your Nokia Advanced Car Kit CK-7W Advanced Car Kit equipment installation in the cockpit Copyright © 2005 Nokia. All rights reserved.
The Nokia Advanced Car Kit was developed for installation in motor vehicles to enable handsfree operation of mobile phones and use of individual phone features. A special emphasis was placed on quick and easy installation. A mobile phone can be connected to the Advanced Car Kit in one of two ways: using an optional phone holder with a cable or over a Bluetooth wireless connection. In some countries, use of the Advanced Car Kit may be restricted by law. Please observe the applicable rules/regulations.
1. Getting started ■ Overview The Advanced Car Kit includes the components shown above. • 1 Handsfree unit HF-5 with mounting plate MK-2 • 2 Remote control button CU-7 • 3 Loudspeaker HFS-12 Copyright © 2005 Nokia. All rights reserved.
• 4 Microphone MP-2 • 5 Cable set PCU-4 • 6 Data cable CA-27 ■ Use of enhancements Depending on the setup, a variety of optional enhancements are available to extend your Advanced Car Kit. Before any installation work is started, ask for professional advice on the enhancements that would best suit your needs. Use only approved enhancements. Ensure that only compatible products are connected to your Advanced Car Kit.
GSM antenna A compatible GSM antenna enables optimised wireless connections. If you have installed an external antenna, remember that in order to comply with RF exposure requirements for mobile transmitting devices, a minimum distance of 20 cm must be maintained between the antenna and all persons. Copyright © 2005 Nokia. All rights reserved.
2. Installation ■ Safety information The basic safety guidelines set out below are to be observed when installing the Advanced Car Kit . Note: • Only qualified personnel should service the Advanced Car Kit or install it in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. • The Advanced Car Kit may only be installed by a qualified service technician using the approved original Nokia parts supplied in the sales package.
• The Advanced Car Kit is suitable for use only in vehicles with a 12 volts negative grounding. Use on other supply voltages all alternative polarity will damage the equipment. • Remember that modern automotive systems include on-board computers where key vehicle parameters are stored. Improper disconnection of the car battery may cause loss of data, necessitating extensive effort for re-initialisation of the system. If you have any concerns, contact your car dealer before any installation work is done.
• Do not smoke when working on the car. Make sure that there is no source of fire or flame nearby. • Take care not to cause damage to electrical cables, fuel or brake lines or safety equipment during installation work. • RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid braking systems, electronic speed control systems, airbag systems).
■ Configuration In principle, the Advanced Car Kit offers two different basic configurations for installation: Connecting a mobile phone using Bluetooth wireless technology To be able to establish a connection from a compatible mobile phone to the handsfree unit, both devices first have to be paired. A compatible mobile phone supporting Bluetooth wireless technology is required for this setup. Copyright © 2005 Nokia. All rights reserved.
Connecting a mobile phone using the data cable and a phone holder When connected via the data cable, the compatible mobile phone is ready for operation with the Advanced Car Kit when placed into the phone holder. Depending on your mobile phone and your vehicle equipment, enhancements such as a phone holder, antenna coupler or external antenna may be required. Copyright © 2005 Nokia. All rights reserved.
■ Installing the Advanced Car Kit See "Introduction" on page 6 for an example of a suitable installation of the Advanced Car Kit equipment. Handsfree unit When installing the handsfree unit, ensure that the cables for the microphone and loudspeaker will reach the places you intend to mount these components. Take care not to mount the handsfree unit inside a closed metal housing or in a place in the car where it would be shielded from radio waves as this may impair the use of the Bluetooth feature.
Remote control button The remote control button should be located so that it is within easy reach of the user. However, ensure that it is placed so that the cable for connection to the handsfree unit can be mounted. A suitable mounting position for the remote control button may be on the console between the front seats. To mount the remote control button, use the hook and loop tape provided. First detach the two parts of the pads from each other.
Loudspeaker To ensure good acoustic quality, mount the loudspeaker so that it is pointed in the user’s direction. We recommend that you mount the loudspeaker a minimum distance of 1 metre away from the microphone to avoid feedback. The Advanced Car Kit also supports connection to a compatible car radio system. If you wish to use the car radio installed in your vehicle with the Advanced Car Kit for audio output, ask your service technician for professional advice.
Insert the plug into the "MIC" socket in the handsfree unit and turn it clockwise to lock it firmly. Note: Use of any other microphone than the microphone MP-2 supplied with the Advanced Car Kit smay impact the transmission quality. Cable set The wires making up the cable harness are to be connected as per the wiring diagram. • Connect the black wire to the vehicle ground (GND). • Connect the yellow wire to the MUTE connection of the car radio.
• Connect the blue wire to the IGNS line of the car using the 1A fuse supplied. Some vehicles do not come with an IGNS connection. This line is not necessary for operation of the Advanced Car Kit; the blue wire can be left unconnected. However, in this case, the Advanced Car Kit does not switch off automatically when the ignition is turned off.
■ Function test After your Advanced Car Kit has been installed, it needs to be checked to ensure that it is working properly. When testing the operation of the equipment, also check that it has been mounted so that it in no way impairs the driver during operation of the vehicle. Copyright © 2005 Nokia. All rights reserved.
3. Putting the Advanced Car Kit into service A compatible mobile phone can be connected to the Advanced Car Kit in one of two ways: over a Bluetooth wireless connection or using a compatible phone holder with a cable. ■ Connecting a mobile phone using Bluetooth wireless technology The first time you establish a wireless link from your Advanced Car Kit using Bluetooth technology, you will have to pair the handsfree unit with the compatible mobile phone that you are using.
■ Pairing using a Bluetooth passcode 1. Make sure that the mobile phone is switched on and the battery is charged. 2. Switch on the Advanced Car Kit. For further information, see "Switching the Advanced Car Kit on/off" on page 26. 3. Open the Bluetooth menu in the mobile phone and activate the Bluetooth function. 4. Make the required settings on the mobile phone to activate a search for Bluetooth devices within range.
■ Automatic pairing with a compatible mobile phone 1. Make the appropriate settings in the mobile phone so that it will pair with your Advanced Car Kit without requiring separate acceptance or authorisation. For further information on the settings required on your mobile phone, see the relevant user’s guide. 2. Switch on the Advanced Car Kit. 3. The Advanced Car Kit now starts an automatic 30-second search for mobile phones that have previously been paired with it using the Bluetooth passcode.
4. Operation The Advanced Car Kit can be controlled with the remote control button or operated using the keypad of a compatible mobile phone. ■ Remote control button 1 The button can be used as follows: • Press • Press and hold (approx. 1 second) • Press twice briefly • Press and hold for a long time (longer than 10 seconds) 2 The ring can be used as follows: • Turn to the left • Turn to the right Copyright © 2005 Nokia. All rights reserved.
3 The indicator light has three states: • On • Flashing • Off ■ Switching the Advanced Car Kit on/off When you turn on the ignition of your car, you automatically switch on the Advanced Car Kit. The indicator light goes on to show that the Advanced Car Kit is activated. When you turn off the car ignition, you deactivate the Advanced Car Kit and the indicator light goes off.
■ Operating the Advanced Car Kit You can use the remote control button to access the following phone features: Accepting a call To accept an incoming call, press the button. Ending a call To end an active call, press the button. Rejecting a call If you do not wish to accept a call, press and hold the button. Making a call Select the desired entry from the phonebook of the mobile phone or key in the desired number on your mobile phone.
Voice dialling You can use voice tags that you have saved in your mobile phone: 1. To start voice dialling, press and hold the button until you hear a tone. 2. Say the voice tag. 3. The mobile phone plays the voice tag and dials the corresponding phone number. For details on using voice dialling, see the user’s guide of your mobile phone. Note: Some mobile phones may not support all the functions described in this user’s guide. Adjusting the volume To adjust the loudspeaker volume, turn the ring.
Resetting paired Bluetooth devices The Advanced Car Kit saves the last 7 Bluetooth devices that it has been paired with. The list of paired Bluetooth devices can be erased. To erase the list, the Advanced Car Kit must be switched off (indicator light goes off): Press and hold the button until a signal tone indicates that the list has been erased.
Care and maintenance Your Advanced Car Kit is a product of superior design and craftmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep all enhancements out of the reach of small children. • Keep the Advanced Car Kit dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
