Users Manual Part 1

Nokia FastMile 4G Receiver Product Overview Functional overview
Issue: DRAFT 3TG-00386-ABGA-TCZZA 45
6.4 Ethernet characteristics
The following are some of the key Ethernet characteristics of the Nokia FastMile 4G
Receiver:
• provides a 1 Gbps Ethernet LAN Interface that, depending on the model of the
Nokia FastMile 4G Receiver, has the following:
• the Compact mono-band and ABA models have a pre-attached 3 m (9.8 ft) Cat5e
shielded UV resistant twisted pair Ethernet cable with a male RJ 45 connector at the
free end; the 4G01-A and 4G03-A Compact mono-band models are also available
with a pre-attached 20 m (65.6 ft) Cat5e shielded UV resistant twisted pair Ethernet
cable with a male RJ 45 connector at the free end <<
confirm 4G01-A >>
• the Compact multi-band models have a female RJ 45 connector that supports
connection of a customer-supplied Ethernet cable:
- the Model 4G17-A requires a Cat5e shielded or non-shielded twisted pair Ethernet
cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length <<
confirm all this info >>
- all other Compact multi-band models require a Cat5e shielded twisted pair Ethernet
cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length
• supports IEEE802.3 1000BASE-T
• supports IEEE802.3az energy efficient Ethernet
• the Ethernet cable for all models is also used for power over Ethernet (PoE) as
per IEEE802.3 at type-2
6.5 Power supply characteristics
The following are some of the key power supply characteristics of the Nokia FastMile
4G Receiver:
• powered through PoE from a Nokia-approved residential gateway, or through a
Nokia-approved PoE injector (see section 11.2 for information about PoE injectors
for use with the FastMile 4G Receiver)
• supports PoE+ as per IEEE802.3 at type-2
• rating: 53 VDC at 600 mA
See section 11.1 for power information.