User Guide
After Sales
Technical Documentation
Handsfree Desktop Charger CHH–7
Original, 11/94Page 14
Table 20. Phone Operating Status
PHONE OPERATING STATUS RIGHT HAND LED PHONE DISPLAY
Desktop charger connected to mains
through ac adapter, phone
disconnected
– –
Rapid charge or waiting for the
right temperature (+5C to +45C)
red state A (bars illuminated
sequentially)
Battery full – trickle charge green state B (all bars steadily
illuminated)
Table 21. Spare Battery Operating Status
SPARE BATTERY OPERATING STATUS LEFT HAND LED
Desktop charger connected to mains through ac adapter, spare battery
disconnected
–
Rapid charge of spare battery or waiting for the phone charging ready or for
the right temperature
red
Spare battery full – trickle charge green
Discharge of spare battery flashing red
Handsfree Function
When located in the charger, the phone always operates in handsfree
mode; the charger’s internal HF speaker and HF microphone being active
during the call. It is also possible to switch between handsfree and
handset operation while a call is in progress. This is done by removing
the phone from the charger (to return to handset operation) or placing it in
the charger (to return to handsfree operation).
The HF speaker volume is adjusted using the volume keys located on the
side of the phone. The HF volume level is set independently from the
phone’s internal earpiece volume; the HF volume setting is stored in the
phone’s memory when the phone is removed from the charger. The HF
microphone audio can be muted by pressing the mute key on the front
edge of the charger. The muted state is indicated by the message
”MUTE” appearing on the phone’s display. Pressing the ”MUTE” key a
second time cancels the mute function.