User Guide

After Sales
Technical Documentation
CARK30 Installation Guide
Original, 09/94 Page 5
Introduction
This installation guide has been prepared to provide the basic information
necessary to install the CARK30 car kit. The guide is not intended to be
definitive, because different types and models of vehicle will require
different installation work. The information given is for general guidance
only, and is for use by suitably qualified personnel.
NOTE: Refer to the Warnings below before commencing the installation
procedure.
WARNINGS
1. ENSURE THE VEHICLE BATTERY IS DISCONNECTED BEFORE
COMMENCEMENT OF THE INSTALLATION PROCEDURE, AND THAT IT
REMAINS DISCONNECTED DURING THE PROCEDURE.
2. DO NOT SMOKE OR USE NAKED FLAMES WHEN WORKING NEAR THE
VEHICLE FUEL SYSTEM.
3. ENSURE THAT ELECTRICAL CABLES, HYDRAULIC LINES AND FUEL
LINES ARE NOT DAMAGED DURING INSTALLATION.
4. CHECK THAT NORMAL CONTROL AND OPERATION OF THE VEHICLE IS
NOT IMPAIRED BY THE INSTALLATION; IN PARTICULAR CHECK THE
BRAKES AND STEERING THOROUGHLY.
5. ALTHOUGH ELECTRONIC SPEED CONTROL, ABS ANTI–LOCK BRAKE
AND FUEL INJECTION SYSTEMS ARE RELATIVELY IMMUNE TO
MALFUNCTION CAUSED BY NEARBY RADIO TRANSMISSIONS, SHOULD
YOU EXPERIENCE FALSE OPERATION OF THESE SYSTEMS OR ARE IN
ANY DOUBT WHATSOEVER AS TO THEIR FUNCTIONALITY, PLEASE
CONSULT THE VEHICLE DEALER.
6. THE CARK30 KIT IS SUITABLE FOR USE ONLY IN VEHICLES WITH A 12V
NEGATIVE EARTH SUPPLY. USE ON OTHER SUPPLY VOLTAGES OR
ALTERNATIVE POLARITY WILL DAMAGE THE EQUIPMENT.