User Guide

After Sales
Technical Documentation
Desktop Charger CHH–6
Page 6 Original, 11/94
Left Desktop Charger LED (for Spare Battery):
The Red LED indicates that the battery is not fully charged due to one of
the following conditions: either the battery or the phone is being charged
at the rapid rate or charging is disabled due to the battery temperature
being out of the normal operating range.
The Green LED indicates that the battery is fully charged.
A flashing RED LED indicates that a discharge cycle has been activated.
List of Modules
Table 1. List of Modules
NAME OF MODULE TYPE
CODE
MATERIAL
CODE
NOTES
Desktop Charger CHH–6 0675041 Fully Assembled Charger
Charging Module DC2H 0200296 Electronic Components
Assembly Parts MCHH6 0260337 Mechanical Parts
Basic Specifications
Table 2. Basic Specifications
Battery Capacities: 380 mAh, 1100 mAh
Charge Time (spare battery only): 40mins max / 380 mAh: 80 % full
1h45 max / 1100 mAh: 80 % full
Charge Time (spare battery
when phone in trickle charge):
1h max / 380 mAh : 80% full
2h30 max / 1100 mAh : 80% full
Discharge Time: 2h40 max / 380 mAh
7h20 max / 1100 mAh
Rapid Charge Temperature: +5 to +45 °C (+40 °C when spare battery fitted)
Low Temperature Charge: –20 to +5 °C (battery temperature)
Rapid Charge Cut–off: temperature/–dV/peakV/timer
Trickle Charge Nominal: C/20
Technical Specifications
Modes of Operation
Charge States and Charge Control
Charge current for the phone is supplied through a series switch transistor
in the phone. When this transistor is on, the charger is supplying a
constant current to the phone.