Installation Guide
Table Of Contents
- Nokia FastMile 4G Receiver Installation Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Installation overview
- 6 Reviewing safety information
- 7 Identifying package contents
- 8 Reviewing roles and installation prerequisites
- 9 Inserting the SIM card in the Nokia FastMile 4G Receiver
- 10 Determining the mounting location
- 11 Mounting and connecting the Nokia FastMile 4G Receiver
- 12 Troubleshooting
- 12.1 Overview
- 12.2 Subscriber has been registered to a different location
- 12.3 Further installation prevented
- 12.4 SIM not inserted
- 12.5 Failed to connect to the LTE network
- 12.6 Cannot attach to LTE network due to hardware mismatch
- 12.7 The receiver cannot be installed at this position
- 12.8 This subscription ID is not provisioned by the Fastmile Controller
- 12.9 This subscriber ID has already completed a successful installation
- 12.10 Nokia FastMile 4G Receiver firmware upgrade to latest build failed
- 12.11 Nokia FastMile 4G Receiver detached from network
- 12.12 Trace request
- 13 Glossary
- Customer document and product support
Nokia FastMile 4G Receiver Installation Guide Installation overview
Issue: 01 3TG-00387-ABBA-TCZZA 29
5 Installation overview
5.1 Overview
5.1 Overview
Be sure to read the Nokia FastMile 4G Receiver Product Overview before installing
the Nokia FastMile 4G Receiver.
Some steps in installing the Nokia FastMile 4G Receiver differ, depending on the
model type of the Nokia FastMile 4G Receiver. Table 3 indicates the model type and
Ethernet cable information for each model of the Nokia FastMile 4G Receiver.
Table 3 Models and model types of the Nokia FastMile 4G Receiver
Some steps in installing the Nokia FastMile 4G Receiver differ, depending on the
remote management method used for the Nokia FastMile 4G Receiver. Remote
management of the Nokia FastMile 4G Receiver can be done from the Nokia
Altiplano FastMile Controller through NETCONF or from an ACS through TR-069.
The remote management method is dependent on the SIM card installed in the Nokia
FastMile 4G Receiver. See the Nokia FastMile 4G Receiver Product Overview for
more information about remote management methods and protocols.
Model Model type Ethernet cable information
4G01-A Compact mono-band Pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair
Ethernet cable
4G01-B ABA Pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair
Ethernet cable
4G02-A Compact mono-band Pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair
Ethernet cable
4G03-A Compact mono-band Pre-attached 3 m (9.8 ft) or 20 m (65.6 ft) Cat5e
shielded twisted pair Ethernet cable
4G04-A Compact multi-band Ethernet cable not provided
4G05-A Compact multi-band Ethernet cable not provided
Note — Some stages of installing the Nokia FastMile 4G
Receiver use an app on a mobile phone. The app information
in this document applies to the Nokia Wireless app (previously
known as the Nokia Field Assistant app) in effect for the
FastMile release indicated on the cover of the Nokia FastMile
4G Receiver documentation. If you subsequently use a
different version of the app, it may differ from how the app is
described in the Nokia FastMile 4G Receiver documentation.