Installation Guide
Table Of Contents
- Nokia FastMile 4G Receiver Installation Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Installation overview
- 6 Reviewing safety information
- 7 Identifying package contents
- 8 Reviewing roles and installation prerequisites
- 9 Inserting the SIM card in the Nokia FastMile 4G Receiver
- 10 Determining the mounting location
- 11 Mounting and connecting the Nokia FastMile 4G Receiver
- 12 Troubleshooting
- 12.1 Overview
- 12.2 Subscriber has been registered to a different location
- 12.3 Further installation prevented
- 12.4 SIM not inserted
- 12.5 Failed to connect to the LTE network
- 12.6 Cannot attach to LTE network due to hardware mismatch
- 12.7 The receiver cannot be installed at this position
- 12.8 This subscription ID is not provisioned by the Fastmile Controller
- 12.9 This subscriber ID has already completed a successful installation
- 12.10 Nokia FastMile 4G Receiver firmware upgrade to latest build failed
- 12.11 Nokia FastMile 4G Receiver detached from network
- 12.12 Trace request
- 13 Glossary
- Customer document and product support
Nokia FastMile 4G Receiver Installation Guide Determining the mounting location
Issue: 01 3TG-00387-ABBA-TCZZA 47
Figure 10 Terms of Service screen
If the Nokia Altiplano FastMile Controller will be used for remote management of the
Nokia FastMile 4G Receiver through NETCONF, you use the Nokia Wireless app,
which works with the Nokia Altiplano FastMile Controller and the Nokia FastMile 4G
Receiver to determine the optimal mounting location for the Nokia FastMile 4G
Receiver, as described in section 10.2.
If an ACS will be used for remote management of the Nokia FastMile 4G Receiver
through TR-069, you use the Nokia Wireless app, which works with the Nokia
FastMile 4G Receiver to determine the optimal mounting location for the Nokia
FastMile 4G Receive as described in section 10.3.