Users Manual Part 1

Management using the Nokia Wireless app
96
Nokia FastMile 4G Receiver Product Overview
3TG-01505-AAAB-TCZZA Issue: 01
13.2 Using the Nokia Wireless app to manage a
unit managed by the Nokia Altiplano FastMile
Controller
If the Nokia Altiplano FastMile Controller is being used for remote management of
the Nokia FastMile 4G Receiver (through NETCONF), you can use the Nokia
Wireless app to perform management activities on it, such as viewing information,
uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting to
factory settings, as described in the following procedure.
You will need the QR code that was saved as described during installation the Nokia
FastMile 4G Receiver in order to scan it when logging in to it through the Nokia
Wireless app. Logging in to the Nokia FastMile 4G Receiver also includes the
following:
• initiating a Bluetooth connection
• enabling Bluetooth
• allowing the Bluetooth pairing request
• establishing the VPN connection
• entering the username and password
Procedure 5 To perform management activities
Use the following procedure to perform management activities through the Nokia Wireless app for
a Nokia FastMile 4G Receiver that is managed remotely by the Nokia Altiplano FastMile Controller
through NETCONF.
1 When you are close to the Nokia FastMile 4G Receiver, connect the mobile phone to the
Internet and open the Nokia Wireless app on the phone.
An introductory screen with a video appears.
Figure 29 shows the introductory screen.
Note — The NETCONF version of the FastMile 4G Receiver
for remote management from the Nokia Altiplano FastMile
Controller is not supported from FastMile 4G Release 2.0.03a
onwards.
Note — The Bluetooth connection from the Nokia Wireless app
towards the Nokia FastMile 4G Receiver is closed after one
hour of inactivity in order to preserve Nokia Wireless phone
resources. There is a mechanism in place that enables the user
to re-establish the Bluetooth connection when he or she
re-enters the app.