Product Info
Table Of Contents
- Nokia FastMile 4G Receiver Product Overview
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Product overview
- 6 Functional overview
- 7 Model overview
- 8 Physical interfaces
- 9 SIM cards
- 10 LEDs
- 11 Power information
- 12 Performance information
- 13 Management using the Nokia Wireless app
- 14 Management using the Web UI
- 15 Standards certification
- 16 Appendix A: Specifications
- 17 Appendix B: RF exposure
- 18 Appendix C: FCC statements and label instructions
- 19 Glossary
- Customer document and product support
Management using the Web UI
126
Nokia FastMile 4G Receiver Product Overview
3TG-00386-ABGA-TCZZA Issue: DRAFT
•
The secondary attached cells physical cell ID (PCI) and DL EARFCN
• Secondary Component Carrier Band (Downlink)
• Secondary Component Carrier Band (Uplink)
• The Signal Strength of the attached cell: this animated model shows the RSRP
(Reference Signals Received Power) of the attached cell
• The RSRP (Reference Signals Received Power) of the attached primary and
secondary cells
• The RSRQ (Reference Signal Received Quality) of the attached primary and
secondary cells
• The RSSI (Received Signal Strength Indication) of the attached primary and
secondary cells
• The CINR (Carrier to Interference plus Noise Ratio) of the attached primary and
secondary cells
• The SINR (Signal to Interference and Noise Ratio) of the attached primary cell
• Total number of MB sent on the LTE interface since last FastMile 4G Receiver
restart
• Total number of MB received on the LTE interface since last FastMile 4G
Receiver restart
• Total number of MB sent on the Ethernet interface since last FastMile 4G
Receiver restart
• Total number of MB received on the Ethernet interface since last FastMile 4G
Receiver restart
• Data Model (TR-069)
• Software Version
• Name and corresponding IP address of the configured Access Points
• Device Info table with information regarding the IMSI, IMEI, Ethernet MAC
Address, Serial Number and the Model Name
You can display available cell information by triggering measurements using the
“Trigger measurement” button on the Web UI status screen. Available cell
information includes: physical cell ID, DL EARFCN, SINR, RSRP, RSRQ, RSSI. Note
the following
• up to 12 available cells are shown, ranked from strongest to weakest by RSRP
• After approximately five seconds from triggering of measurements, the FastMile
4G Receiver will detach from the carrier’s network. Push the measurements
status refresh button while the FastMile 4G Receiver is detached to see the
grayed-out Web UI status screen. Reattachment of the FastMile 4G Receiver may
take from several seconds to up to five minutes. You will need to refresh the
browser for updated Web UI status screen contents after reattachment of the
FastMile 4G Receiver.
• available cell information will not be visible after rebooting the FastMile 4G
Receiver
Figure 56 shows an example of the top part of the Status screen when the FastMile
4G Receiver is not connected to a cell.