Product Info
Table Of Contents
- Nokia FastMile 4G Receiver Product Overview
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Product overview
- 6 Functional overview
- 7 Model overview
- 8 Physical interfaces
- 9 SIM cards
- 10 LEDs
- 11 Power information
- 12 Performance information
- 13 Management using the Nokia Wireless app
- 14 Management using the Web UI
- 15 Standards certification
- 16 Appendix A: Specifications
- 17 Appendix B: RF exposure
- 18 Appendix C: FCC statements and label instructions
- 19 Glossary
- Customer document and product support
Nokia FastMile 4G Receiver Product Overview Functional overview
Issue: DRAFT 3TG-00386-ABGA-TCZZA 45
•
supports IEEE802.3az energy efficient Ethernet
• the Ethernet cable for all models is also used for power over Ethernet (PoE) as
per IEEE802.3 at type-2
6.5 Power supply characteristics
The following are some of the key power supply characteristics of the Nokia FastMile
4G Receiver:
• powered through PoE from a Nokia-approved residential gateway, or through a
Nokia-approved PoE injector (see section 11.2 for information about PoE injectors
for use with the FastMile 4G Receiver)
• supports PoE+ as per IEEE802.3 at type-2
• rating: 53 VDC at 600 mA
See section 11.1 for power information.
6.6 Remote management protocols
Remote management of the Nokia FastMile 4G Receiver can be done from the Nokia
Altiplano FastMile Controller through NETCONF or from an ACS through
TR-069/TR181 depending on the installed SIM card.
For the first startup, the Nokia FastMile 4G Receiver starts from the NETCONF
version.The Nokia FastMile 4G Receiver will automatically detect the remote
management protocol through information that is on the SIM card installed in the unit.
If the Nokia FastMile 4G Receiver detects that the remote management protocol on
the SIM card is TR-069/TR181, it restarts and starts up with TR-069/TR181
management.
If the remote management protocol is NETCONF, the Nokia FastMile 4G Receiver
can be managed remotely from the Nokia Altiplano FastMile Controller.
If the remote management protocol is TR-069, the Nokia FastMile 4G Receiver can
be managed remotely from an ACS.
Figure 9 shows the Nokia Altiplano FastMile Controller being used for remote
management of the Nokia FastMile 4G Receiver. Note that NETCONF is used by the
Nokia Altiplano FastMile Controller to manage the Nokia FastMile 4G Receiver, and
that an ACS manages the residential gateway through TR-069.
Note — The NETCONF version of the FastMile 4G Receiver
for remote management from the Nokia Altiplano FastMile
Controller is not supported from FM 2.0.03a onwards.