Product Info
Table Of Contents
- Nokia FastMile 4G Receiver Product Overview
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Product overview
- 6 Functional overview
- 7 Model overview
- 8 Physical interfaces
- 9 SIM cards
- 10 LEDs
- 11 Power information
- 12 Performance information
- 13 Management using the Nokia Wireless app
- 14 Management using the Web UI
- 15 Standards certification
- 16 Appendix A: Specifications
- 17 Appendix B: RF exposure
- 18 Appendix C: FCC statements and label instructions
- 19 Glossary
- Customer document and product support
Nokia FastMile 4G Receiver Product Overview Physical interfaces
Issue: DRAFT 3TG-00386-ABGA-TCZZA 55
Figure 12 shows the location of the ground point for the Compact multi-band models
of the Nokia FastMile 4G Receiver.
Ethernet port The Compact multi-band models have a female RJ 45 connector for attaching a
customer-supplied Ethernet cable:
• the Model 4G17-A has a floating ground design that supports << need Ethernet
cable (shielded/un-shielded and length) and connector pinout info
>>
• all other Compact multi-band models require a cat5e shielded Ethernet cable with
standard pinouts that is a maximum of 80 m (262 ft) in length
The same Ethernet cable is also used for power (PoE as per IEEE802.3 at type-2). PoE
must be provided by a Nokia-approved residential gateway or a Nokia-approved PoE
injector (see section 11.2 for information about PoE injectors for use with the FastMile
4G Receiver).
The Ethernet port is located on the underside of the unit; see Figure 13.
Status LED Single multifunction LED that indicates status information for the Nokia FastMile 4G
Receiver.
Located on the top of the unit.
See section 10.1 for a figure showing the location of the status LED of the Compact
multi-band models and information about its behavior.
Signal strength LEDs The Compact multi-band models have a set of five LEDs that work together to indicate
the LTE signal strength detected by the Nokia FastMile 4G Receiver.
Located on the top of the unit.
See section 10.2 for a figure showing the location of the signal strength LEDs and
information about their behavior.
Measurement button Button to activate the signal strength LEDs.
Located on the side of the unit.
See section 10.2 for a figure showing the location of the measurement button and
information about using it to activate the signal strength LEDs.
Reset button Button to reset the Nokia FastMile 4G Receiver.
Located on the underside of the unit; see Figure 13.
SIM slot Slot for Nano/4FF SIM card for a Compact multi-band model of the Nokia FastMile 4G
Receiver.
Located on the underside of the unit; see Figure 13.
See section 9.2 for SIM card information for the Compact multi-band models of the
Nokia FastMile 4G Receiver.
Interface Description
(2 of 2)