Product Info

Table Of Contents
Performance information
68
Nokia FastMile 4G Receiver Product Overview
3TG-00386-ABGA-TCZZA Issue: DRAFT
The results in the above table are based on the following:
Downlink: DL 3xCA 2x2MIMO 256 QAM
Uplink: single carrier 64 QAM
FDD inter-band 3CA
TDD Band 41 intra-Band 2CA, configuration is configuration 2, subframe 7
Base Bandwidth 20M
Data rates can have a margin of 2%
Packet length is 1470B for UDP
Window is 1000k for TCP
Data rates are for IPv4 cases
Data forwarding working on router model
The end-to-end throughput is achieved in the conductive mode with cable
connected.
Ethernet throughput for the Nokia FastMile 4G Receiver is as per standard Ethernet
1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at
1000 Mbps when a residential gateway or a PoE injector is connected to the Nokia
FastMile 4G Receiver.
12.3 Carrier aggregation information
The following tables provide carrier aggregation support information for the Nokia
FastMile 4G Receiver:
Model 4G01-A and 4G01-B (2*2 MIMO downlink with SISO uplink): Table 16
Model 4G02-A (2*2 MIMO downlink with SISO uplink): Table 17
Model 4G03-A (2*2 MIMO downlink with SISO uplink): Table 18
Model 4G04-A (2*2 MIMO downlink with SISO uplink): Table 19
Model 4G05-A and 4G05-B (2*2 MIMO downlink): Table 20
Model 4G06-A (2*2 MIMO downlink): Table 21
Model 4G17-A (2*2 MIMO downlink with SISO uplink): Table 22
Note 1 — B48 for the 4G01-B has not been tested for FCC
certification and is not ready for commercial use in this release.
Note 2 — FCC certification for B48 for the 4G06-A is ongoing
and is not ready for commercial use in this release.