Product Info
Table Of Contents
- Nokia FastMile 4G Gateway Product Overview
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Product overview
- 6 Functional overview
- 7 Model overview
- 8 Physical interfaces
- 9 SIM card
- 10 LEDs
- 11 Power information
- 12 Performance information
- 13 Management using the Web UI
- 14 Standards certification
- 15 Appendix A: Specifications
- 16 Appendix B: RF exposure
- 17 Appendix C: FCC statements and label instructions
- 18 Glossary
- Customer document and product support
Nokia FastMile 4G Gateway Product Overview ANSI safety guidelines
Issue: 02 3TG-00743-ABEA-TCZZA 33
4.3.2 Cabling
The following are the guidelines regarding cables used for the Nokia FastMile 4G
Gateway:
• All cables must be approved by the relevant national electrical code.
• If cabling is supplied with the Nokia FastMile 4G Gateway, the supplied cabling
must be used with the equipment.
4.3.3 Protective earth
Earthing and bonding of the Nokia FastMile 4G Gateway must comply with the
requirements of NEC article 250 or local electrical codes.
4.4 ESD safety guidelines
The Nokia FastMile 4G Gateway is sensitive to ESD if opened. Operations personnel
must observe the following ESD instructions when they handle the Nokia FastMile
4G Gateway.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
4.5 Environmental requirements
The environmental requirements for the Nokia FastMile 4G Gateway are:
• operating temperature (ambient): 0°C to 40°C (32°F to 104°F)
• storage temperature (ambient): -40°C to 70°C (-40°F to 158°F)
• operating relative humidity: 5% to 85% relative humidity, non-condensing
• short-term relative humidity: 5% to 93% relative humidity, non-condensing
See chapter 15 in this guide for more information about the Nokia FastMile 4G
Gateway and for other Nokia FastMile 4G Gateway specifications.
Caution — This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
4G Gateway.