Product Info
Table Of Contents
- Nokia FastMile 4G Gateway Product Overview
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ETSI safety guidelines
- 4 ANSI safety guidelines
- 5 Product overview
- 6 Functional overview
- 7 Model overview
- 8 Physical interfaces
- 9 SIM card
- 10 LEDs
- 11 Power information
- 12 Performance information
- 13 Management using the Web UI
- 14 Standards certification
- 15 Appendix A: Specifications
- 16 Appendix B: RF exposure
- 17 Appendix C: FCC statements and label instructions
- 18 Glossary
- Customer document and product support
Management using the Web UI
74
Nokia FastMile 4G Gateway Product Overview
3TG-00743-ABEA-TCZZA Issue: 02
• low:
• the following pre-routing is supported: port forwarding, DMZ, host application, and
host drop
• the following application services are supported: DDNS, DHCP, DNS, H248, IGMP,
NTP client, SSH, Telnet, TFTP, TR-069, and VoIP
• the following types of ICMP messages are permitted: echo request and reply,
destination unreachable, and TTL exceeded. Other types of ICMP messages are
blocked.
• DNS proxy is supported from LAN to WAN but not from WAN to LAN
• high:
• pre-routing and application services are not supported
• UDP Port 8000 can be used to access the services, for example FTP can use 8021
and Telnet can use 8023. Regular UDP cannot be used.
• RG access is permitted via the LAN side but not via the WAN side.
Note that the access control level configured in Procedure 30 takes precedence over the firewall
policy configured in this procedure.
1 If you are not already logged in to the Nokia FastMile 4G Gateway, log in as described in
section 13.2.
2 Select Security > Firewall from the top-level menu along the left side of the Nokia FastMile
4G Gateway window.
3 Configure the firewall security level, and enable or disable attack protection
4 Click Save.
5 STOP. This procedure is complete.
Procedure 25 Configure MAC filter parameters
Use this procedure to configure MAC filter parameters for the Nokia FastMile 4G Gateway.
1 If you are not already logged in to the Nokia FastMile 4G Gateway, log in as described in
section 13.2.
2 Select Security > MAC Filter from the top-level menu along the left side of the Nokia FastMile
4G Gateway window.
3 Configure a MAC filter for the Ethernet interface.