Manual
48
Camera
Self timer — to activate the self-timer (main camera only). Select the
self-timer delay, and to activate the self-timer, select Activate.
Sequence mode — to activate the sequence mode (images only). See ‘Capture
images in sequence,’ p. 48.
Go to Gallery — to open Gallery
To use panorama mode, select Options > Panorama mode. indicates
panorama mode. Press the camera key to start capturing a panorama image. Turn
slowly to the right or left. You cannot change the direction. To stop the panorama,
press the camera key again. This option is available only for the main camera.
To customise the toolbar, select Options > Customise toolbar. You can remove an
item from the toolbar, or change, add, or move items.
The available options vary depending on the capture mode and view you are in.
The setup settings return to the default settings when you close the camera.
If you select a new scene, the colour and lighting settings are replaced by the
selected scene. See ‘Scenes,’ p. 49. You can change the setup settings after
selecting a scene if needed.
After capturing an image
After you capture an image, select the following from the active toolbar (available
only if Show captured image is set to On in still image camera settings):
• To send the image, press the call key, or select Send ().
• To send the image to a compatible online album, select Sign in for Share online
()
• To open the Gallery, select Go to Gallery ().
• If you do not want to keep the image, select Delete ().
• To use the image as wallpaper in the standby mode, select Options > Set as
wallpaper.
• To set the image as a call image for a contact, select Options > Assign to
contact.
Capture images in sequence
You can set the main camera to capture six images or more in a sequence. In the
active toolbar, select Sequence mode > Burst. To capture images, press the
camera key. To capture more than six images, press and hold the camera key. The
number of images captured depends on the available memory.
RM-431_en_1_updates_during_localisation.fm Page 48 Thursday, January 22, 2009 1:51 PM