Cell Phone User Manual

Settings
37
Select Menu > Settings > Connectivity > Packet data > Packet data connection
to establish an GPRS connection.
To set the phone to automatically register to an GPRS network when you switch
on the phone, select Always online.
To set the phone to register to an GPRS network and establish a connection when
an application needs it, and end the connection when you end the application,
select When needed.
■ Enhancements
This menu is shown only if the phone is or has been connected to a compatible
mobile enhancement.
Select Menu > Settings > Enhancements. You can select an enhancement menu
if the corresponding enhancement is, or has been connected to the phone.
Depending on the enhancement, select from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer
is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on
for 15 seconds after a keypress.
TTY/TDD > Use TTY > Yes — to use the TTY settings instead of headset or
loopset settings
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. The services are browser and multimedia messaging. Get
the settings from your SIM card, from a service provider as a configuration
message, or enter your personal settings manually.
To save the configuration settings received by a configuration message from a
service provider, see "Configuration settings," p. 9.
Select Menu > Settings > Configuration and from the following options:
Default configuration settings — to view the service providers saved in the phone.
Scroll to a service provider, and select Details to view the applications that the
configuration settings of this service provider support. To set the configuration
settings of the service provider as default settings, select Options > Set as
default. To delete configuration settings, select Delete.