Nokia Customer Care RM-8/RM-47/RM-48 Series Transceivers 4 - Service Tools RM-8/RM-47/RM-48 Copyright 2005 Nokia Corporation.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools Table of Contents Page No JBV-1 Docking Station and DA-24 Adapter ...................................................... 4 Product Code ..................................................................................................... 4 MJ-29 Module Jig ................................................................................................ 6 Product Code ......................................................................................
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care Product Code ................................................................................................... 19 CA-5S Cable....................................................................................................... 20 Product Code ................................................................................................... 20 XCS-4 Modular Cable .....................................................................................
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools View of DKU-5 Cable24JBV-1 Adapter Docking Station and DA-24 The JBV-1 Docking Station has been designed for calibration and software update use. The DA-24 Docking Station Adapter makes signal connections to the phone. JBV-1 and DA-24 are used as one unit.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care Figure 1: DA-24 Figure 2: SA-50 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools MJ-29 Module Jig Module Test Jig MJ-29 is designed for regional Central Services for TB4 module testing. It can be used for flashing and RF-, battery-, system-, radio- and SIM reader testing. ■ Product Code MJ-29 Module Test Jig:0770707 Spare pin code:077xxxx Figure 3: View of MJ-29 Note: The nominal supply voltage for MJ-29 is +4.2 V. The supply voltage must not exceed +5.0 V (min 3V).
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care RJ-30 Soldering Jig RJ-30 Soldering Jig is used for soldering and as a rework jig for TB4 module. ■ Product Code RJ-30 soldering jig:0770751 Figure 4: View of RJ-30 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools FPS-8 Flash Prommer (Sales Pack) The Flash Prommer FPS-8 is used with e.g. DA-24 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply. The sales pack includes: - FPS-8 Flash Prommer0750123 - FPS-8 Activation Sheet9359289 - Universal Power Supply0680032 - AXS-4 Service Cable (D9-D9)0730090 - Printer cable0730029 ■ Sales package code FPS-8 Flash Prommer:0080321 Figure 5: View of FPS-8 8 COMPANY CONFIDENTIAL Copyright © 2005 Nokia.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care FPS-8C Parallel Flash Prommer (Sales Pack) The Parallel Flash Prommer FPS-8C is used with DA-24 and JBV-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. SF11C card is func tionally identical to FPS-8. ■ Sales package code FPS-8C Parallel Flash Prommer:0080396 Figure 6: View of FPS-8C Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output. ■ Product Code ACF-8 Universal Power Supply:0680032 Figure 7: View of ACF-8 10 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care SF-26 POS (Point of sales) Flash Adapter SF-26 POS Flash Adapter is used in place of the phone's normal battery during service, to supply a controlled operating voltage. ■ Product Code SF-26 POS Flash Adapter:0770886 Spare pin code:077xxxx Figure 8: View of SF-26 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage. ■ Product Code FLC-2 DC Cable:0730185 Figure 9: View of FLC-2 12 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care AXS-4 Service Cable The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connec tors e.g. between PC and FPS-8. Cable length is 2 meters. ■ Product code AXS-4 D9-D9 Service Cable:0730090 Figure 10: View of AXS-4 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4S to SF-26. ■ Product code XCS-1 Service Cable:0730218 Figure 11: View of XCS-1 14 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care PKD-1 SW Security Device SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Without the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if needed.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools FLS-4S POS (Point of sales) Flash Device (Sales Pack) FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. ■ Product Code Sales Pack - Europe/Africa0080541 Sales Pack -APAC0080542 Figure 13: View of FLS-4S 16 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 to FPS-8. ■ Product Code PCS-1 Power Cable:0730012 Figure 14: View of PCS-1 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools XRF-1 RF Cable RF cable XRF-1 is used to connect e.g. Module Jig MJ-29 to RF measurement equipment. ■ Product code XRF-1 RF Cable:0730085 Figure 15: View of XRF-1 18 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care DAU-9S MBUS Cable The MBUS Cable DAU-9S has a modular connector, and is used with be tween PC's serial port and e.g. Module Jig MJ-29. ■ Product Code DAU-9S MBUS Cable:0730108 Figure 16: View of DAU-9S Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools CA-5S Cable The CA-5S is used to connect e.g. JBV-1 to the phone. ■ Product Code CA-5S Cable:0730283 20 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care XCS-4 Modular Cable XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. ■ Product code XCS-4 Modular Cable:0730178 Figure 17: View of XCS-4 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools Printer Cable This cable is used to connect the PC to FPS-8. ■ Product code Printer Cable:0730029 Figure 18: View of Printer Cable w of Printer Cable 22 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 4 - Service Tools Nokia Customer Care DAU-9T Service Cable ■ Product code DAU-9T Service Cable:0730267 Issue 2 03/2005 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48 Nokia Customer Care 4 - Service Tools DKU-5 FBUS/USB Cable Seamless connectivity between USB compatible PC and Nokia phone. Supports a Nokia PC Suite usage and synchronisation desk stand. Enables data transfer and synchronisation with PC. ■ Product code DKU-5 FBUS/USB Cable:0730235 Figure 19: View of DKU-5 Cable 24 COMPANY CONFIDENTIAL Copyright © 2005 Nokia. All Rights Reserved.